Expansion vessel
The expansion vessel compensates for the expansion of heating water as it heats up. This keeps the pressure stable and prevents air from entering the system.
Water expands when heated and contracts again when cooled. In a closed heating system, it has nowhere to go, which is why a balancing mechanism is needed. This is the expansion vessel, often abbreviated as MAG. It usually works with a rubber membrane: heating water is on one side and a gas cushion, typically nitrogen, is on the other. As the water warms up, it compresses the cushion.
Why this is important
Without this component, the system would lose water via the safety valve when heating up and suck in air when cooling down. The klimaaktiv guide to hydraulic balancing shows what can result from this: in the worst case, gurgling radiators are a sign of insufficient system pressure and oxygen in the pipe system. This risks corrosion and sludge accumulation. Proper pressure maintenance that functions well and is regularly serviced protects against this.
What this means for you
- Check the pressure: The klimaaktiv guide lists system pressure as one of the points you can check yourself before the heating season. Ask to be shown the correct range when the system is handed over.
- Pre-charge pressure: This is set according to manufacturer specifications and calculations. This is done by the installer. If the gas cushion has escaped, the vessel can no longer fulfill its task.
- Warning signs: If the pressure keeps dropping or if the radiators are gurgling, call your installer.
- Documentation: According to the guide, pre-charge, filling and final pressure should be included in the balancing documentation.
It is best to discuss the appropriate check as part of servicing. The water side is explained in Heating water.
Sources
- klimaaktiv guide to hydraulic balancing (BMK, 2023) (retrieved on 4 November 2026)
- klimaaktiv Guide to Good Heat Pump Installation (2026) (accessed on 4 November 2026)
- Wikipedia: Expansion vessel (retrieved on 4 November 2026)