Frost protection (glycol and anti-freeze valve)

Frost protection prevents water from freezing in the heat pump's pipework. Common methods are glycol, the control unit's frost protection function, and anti-freeze valves.

Where water flows outdoors or in cold ground, it can freeze and damage pipes or heat exchangers. With heat pumps, this affects two areas. The ground loop of a brine-to-water heat pump is filled with an anti-freeze mixture from the outset. With a monobloc heat pump, on the other hand, heating water is inside the outdoor unit and in the pipework leading to it.

Why this is important

With a monobloc, there are several options. If the control unit and circulation pump are operational, the system's frost protection function works. If remaining frost-free cannot be guaranteed, anti-freeze valves drain the pipework. According to SHKwissen, glycol in the heating circuit or in a separate circuit with a system separation heat exchanger reduces efficiency. If a system without anti-freeze is standing still in winter, for example after being decommissioned or during a power cut, it must be drained before freezing temperatures occur.

In Austria, ÖNORM H 5195-2 (2025-06-01 edition) specifies requirements for systems with frost-protected heat transfer fluids: among other things, it regulates glycol-based anti-freeze agents and corrosion protection.

What this means for you

  • Before buying: Ask how the pipes to the outdoor unit are protected and what happens during a power cut in winter.
  • In winter: Do not simply disconnect the system from the power supply, even when on holiday. The frost protection function needs electricity.
  • After triggering: If an anti-freeze valve has drained the system, it must be refilled professionally.
  • Brine: According to the Swiss Federal Office of Energy, the concentration should comply with the equipment manufacturer's specifications.

Have the frost protection checked during maintenance.

All terms · Heat pump knowledge