Cascade (multiple heat pumps)

In a cascade system, several heat pumps work together as a single system. This provides greater flexibility and reliability, especially in large buildings.

A cascade refers to a system where several heat pumps work together as a single installation. The reason is often output. According to a technical report by the German Umweltbundesamt (Environment Agency), standard mass-market units are available up to around 30 to 40 kW; for apartment buildings and larger systems, multiple units in cascade are therefore often used. In a research project by Fraunhofer ISE, the heating loads of the investigated apartment buildings ranged between 23 and 93 kW.

Why this is important

Heat demand fluctuates, and the system needs to adjust. According to the dena guide, a cascade is one of three options for this, alongside modulating and multi-stage devices. Multiple units offer greater flexibility and increase reliability against breakdowns. Units with different outputs can be combined so that even with low demand, little short cycling occurs. A continuously variable unit in the cascade improves adjustment even further. In return, according to the guide, a single multi-stage unit has advantages in partial-load efficiency, space requirements and installation effort.

What this means for you

  • A cascade is particularly relevant when there is a high heating load. Therefore, make sure you have the output calculated precisely.
  • According to Fraunhofer ISE, coordinated planning of the heat pump, storage tank, hydraulics and control system is key.
  • For air-source units, plan space and sound emissions for each outdoor unit early on.
  • Ask how the control system cuts in the individual units.

You can find an overview of the planning process under Process. We connect you with suitable installers via a request for quotes.

All terms · Heat pump knowledge