Exhaust air heat pump

An exhaust air heat pump uses residual heat from extracted indoor air via the ventilation system. This is only suitable for homes with a very low heating demand.

An exhaust air heat pump does not draw its heat from outside, but from the air extracted from the house by a ventilation system. The klimaaktiv guide lists this exhaust air as a possible heat source. In combination heat pump units that combine heating, ventilation and hot water, the exhaust air is either the sole source or is supplemented by outdoor air or a brine circuit.

Why this is important

The heating capacity is limited. According to klimaaktiv, devices with exhaust air as the sole heat source are only suitable for passive houses. The guide lists exhaust air as a source only when the heating demand is below 10 kWh per m² of gross floor area per year. Combination units in general are best suited to small to medium-sized detached houses with around 10 to 25 kWh per m². The heating load should ideally be below 20 W per m² or under 4 kW in total.

What this means for you

  • First check your energy performance certificate (Energieausweis) and heating load. Without a very high standard of insulation, this design is not suitable.
  • klimaaktiv does not recommend pure warm-air heating systems for Austria, as they often lead to dry air and unwanted room temperatures.
  • With underfloor heating or radiators, you can control each room individually.
  • An exhaust air system without a heat pump is something different. According to klimaaktiv, controlled ventilation with heat recovery offers advantages in terms of hygiene, comfort and energy efficiency.

For less well-insulated homes, take a look at the air-to-water heat pump. Find out what works for your home with our suitability check.

All terms · Heat pump knowledge