Hydraulic separator

A hydraulic separator decouples the heat pump circuit from the heating circuits. It solves flow volume issues, but can mix the flow and return.

A hydraulic separator is a direct pipe connection between flow and return with low flow resistance. It sits between the heat generator circuit and the heating circuits in the house. This allows both to run with different volumes of water without affecting each other.

Why this is important

According to the klimaaktiv guide to heat distribution, a separator is needed when different flow rates prevail on the generator and consumer sides. This comes at a price: if more water flows in the heating circuit, colder return water mixes into the flow. If more flows in the generator circuit, warm flow water gets into the return. The guide therefore advises avoiding separators as far as possible. They are advantageous when there are several heat generators. The manual of the Swiss Federal Office of Energy mentions the separator as a possible solution for modulating heat pumps, so that circulating pumps do not run in series.

What this means for you

  • Ask questions: If a separator or a small buffer tank is listed in the quote, ask to have the reason explained.
  • Detached house: According to the klimaaktiv guide, a heating storage tank is usually not necessary there. Exceptions exist for hydraulic reasons, such as with multiple mixing groups.
  • Checking temperatures: If the flow temperature in the heating circuit is significantly below the flow temperature of the heat pump, return water is probably mixing in. This costs efficiency. Raise this issue with your installer.

With a hybrid heating system with two heat generators, a separator can make sense. On the subject of storage tanks, read Buffer storage tank.

All terms · Heat pump knowledge