Flow rate
The flow rate indicates how much heating water flows through the system per hour. The heat pump requires a minimum volume, otherwise it will not run properly.
The flow rate indicates how much water flows through a pipe or valve within a certain period of time. In the heating circuit, it is usually measured in litres per hour. The circulating pump drives the water, while pipes and valves slow it down.
Why this is important
Heat only reaches the room with the water. How much depends on the flow rate and the temperature difference (spread). A table in the klimaaktiv guide on hydraulic balancing demonstrates this using a sample valve: at the same valve position, around 40 litres per hour with a 30 °C spread deliver about 1.400 Watt, whereas with a 10 °C spread it is only about 470 Watt. With a smaller temperature spread, as is usual for heat pumps, more water must therefore flow.
The energy consultancy of the City of Zurich advises restricting the flow rate as little as possible. This allows the flow temperature to drop and heat is distributed more evenly. For the minimum flow rate, the Bundesverband Wärmepumpe (German Heat Pump Association) points to the manufacturer's instructions. For air-to-water units, energy for defrosting must also be taken into account.
What this means for you
- Ask in the quote what minimum flow rate your unit requires and how it is ensured when heating circuits close.
- Many closed thermostatic valves restrict the flow rate, see individual room control.
- More is not automatically better. According to the guide, pumps are often chosen too large. That costs electricity.
- The set values per valve should be included in the documentation.
The water flow rates for each room are determined by hydraulic balancing.
Sources
- klimaaktiv guide to hydraulic balancing (BMK, 2023) (retrieved on 4 November 2026)
- Energieberatung Stadt Zürich: Wärmepumpen optimal einstellen (Faktenblatt Heizkurve), 2023 (accessed on 4 November 2026)
- Bundesverband Wärmepumpe (BWP): Leitfaden Hydraulik (accessed on 4 November 2026)