Air-to-air heat pump
An air-to-air heat pump extracts heat from the outside air and releases it directly into the indoor air. In most cases, this is a split air conditioning unit with a heating function.
An air-to-air heat pump extracts heat from the outdoor air and transfers it directly to the indoor air without using heating water. klimaaktiv notes that split air conditioning units are fundamentally air-to-air heat pumps. Many units can cool and heat. One outdoor unit supplies one or more indoor units. The system does not require radiators or pipework.
Why this is important
Compared to direct electric heaters, such a unit is more efficient according to klimaaktiv. However, replacing a water-based heating system with one is usually not advisable. Many people find radiant heat more pleasant than moving air. The energy advisory service of the German Consumer Advice Centre (Verbraucherzentrale) lists draughts and noise both indoors and outdoors as disadvantages, recommending their use only in well-insulated buildings.
What this means for you
- The device cannot heat domestic hot water. Plan a separate solution for this, such as a domestic hot water heat pump.
- Installing it yourself is not possible. Work on the refrigerant circuit is reserved for specialist installers.
- Check in advance whether mounting the outdoor unit on the wall is permitted.
- Clean or replace the filters according to the manufacturer's instructions.
- From 1 January 2029, new air-to-air split units up to 12 kW must not contain fluorinated gases with a GWP of 150 or more, unless safety requirements at the location require it. Read more under F-Gas Regulation.
The heat pump calculator shows what makes sense for your house.
Sources
- klimaaktiv: Split-Klimagerät energieeffizient kaufen (accessed on 4 November 2026)
- Energieberatung der Verbraucherzentrale (Deutschland): Luft-Luft-Wärmepumpe (accessed on 4 November 2026)
- Regulation (EU) 2024/573 on fluorinated greenhouse gases (EUR-Lex) (retrieved on 4 November 2026)