Cooling with a heat pump
Many heat pumps can also cool in summer: passively via the ground or groundwater, or actively with the compressor running.
A heat pump can also extract heat from the house. In this case, the water in the heating circuit is cooled, and with it the floor or wall. With geothermal heat and groundwater, this happens passively, also known as free cooling: the heat pump stays off and only the circulating pump runs. Air source heat pumps with a cooling function cool actively. To do this, the devices must operate just as they do in heating mode and consume more energy.
Why this is important
The demand for cooling is rising. According to GeoSphere Austria, there were 3 to 12 hot days per year in the state capitals between 1961 and 1990, but already 9 to 23 between 1991 and 2020. Passive cooling reduces energy demand to a minimum compared to conventional air conditioning systems. With ground probes, the heat transferred back into the ground even helps in winter when the system heats. However, the effect is limited: if surfaces are cooled too much, condensation forms, which would cause structural damage according to the Energieinstitut Vorarlberg.
What this means for you
- You need panel heating. This works particularly well with underfloor or ceiling surfaces.
- Order the cooling function when purchasing and ask how the system prevents condensation.
- Shading comes first. The Energieinstitut Vorarlberg describes it as the most important measure against heat in the house.
- If that is not enough, an efficient air conditioning unit is an option – see Air-to-air heat pump.
You can read about which heat source fits best in Air or geothermal energy.
Related terms
Panel heating (underfloor and wall heating)Brine-to-water heat pump (geothermal)Air-to-air heat pumpDeep borehole (geothermal probe)
Sources
- GeoSphere Austria: Kühlen mit Geothermie (accessed on 4 November 2026)
- Energieinstitut Vorarlberg: Innenräume kühlen und kühl halten (accessed on 4 November 2026)
- Umweltbundesamt (Deutschland): Umgebungswärme und Wärmepumpen (accessed on 4 November 2026)